Keep a cool head under fire ™
HOOD STYLES : Hoods

COBRA™ DOUBLE PLY HOOD with Single Ply Bib

Style # 3098285

Material : PBI®/Lenzing FR®
DESIGN : Double ply top - single ply bib drape
  • Protective double-ply hood, single ply bib drape
  • Contoured shoulder
  • X-heavy 1/2" wide elasticized face opening
  • Flat stitched seams
  • Both outer shell and lining are same fabric

SUGGESTED LIST PRICING : $31.89

Find a Distributor near you!

share:

PBI, an extraordinary fiber that does not burn in air, has changed the fire service’s expectations for protection, comfort and performance. Blended with Lenzing FR® the fabric is the lightest, most comfortable flame resistant hood fabric on the market. With a moisture absorbency of 13%, the PBI blend fabric will absorb up to five times more perspiration than typical aramid fabrics. Thermal Protective Performance (TPP) testing indicates the fabric has an excellent TPP rating. For example, two layers of 5.7 oz. / sq. yd. PBI/Lenzing FR blend has an outstanding TPP rating of 33.1 after five washing. Additionally, the fabric resists most chemicals and provides excellent flame resistance with char lengths approximately 25% less than aramid fabrics. Along with outstanding protection and comfort, the PBI/Lenzing FR blend is practical. The natural tan color hides soils and is easily washed and dried. Fabric is prescoured and heat set to maintain shape and fit. Other properties of the fabric include:

  • Inherently flame resistant
  • Low thermal shrinkage
  • Excellent moisture management – wicks moisture better than cotton.
  • Good chemical resistance
  • Incredibly lightweight and soft; no itch or irritation
  • Excellent TPP rating for lightweight fabric
  • Tan color hides soil
  • High initial cost
  • Average wear life

FABRIC:        

  • Hood is a blend of PBI®/Lenzing FR® – approx. 5.7 oz sq yd.
  • 1 x 1 rib construction for better stretch and comfort.
  • Not compliant with NFPA 1971 - Current Edition.


STITCH TYPES AND SEAMS:

  • All stitching conforms to Federal Standard 751 Specifications (FED-STD-751).
  • Top is assembled with flat seam, stitch type 607.
  • Elastic in face opening is serged with stitch type 504 and reinforced with bottom cover-stitch, stitch type 406.
  • Drape attachment to top is done with stitch type 401 and reinforced with stitch type 605.
  • Binding is applied with bottom cover-stitch, stitch type 406.


THREAD:

  • All sewing done with 100% Nomex thread size TEX 40.


CONSTRUCTION:

  • Composed of two layers of a knit at top and a single layer at bib.
  • Hood is seamed from top of face opening to bib with top and bottom cover stitch.
  • Bib is joined around circumference of hood and sewn on both sides and cover stitched top and bottom.
  • Face opening shall be an oval shape measuring 6" in width and 3¼" in height. Extra-Heavy ½" wide elastic is serged to the perimeter of the face opening. The face opening with elastic is then folded back ½" and cover stitched. The heavier elastic around the face opening stretches a full 17" for easy donning.  It also is guaranteed to fit snugly around all styles of SCBA masks and will retain its shape better after repeated use and laundering.
  • The bottom edge of bib is completely bound with self-fabric bias cut binding (cut in five degree cut pattern).
     

FINISHED HOOD MEASUREMENTS:  

     

  1. Length of hood top 12 ± ½" (A).
  2. Length of bib along shoulder seams 2" (B), center front 6" (C) center back 4" ± ½" (D).
  3. Width of hood top at top of face opening 7½" ± 1" (E).
  4. Width of hood top at center of face opening 5-1/4" ± ½" (F).
  5. Width of hood top at bottom of face opening 8½" ± 1" (G).
  6. Width of widest point of yoke 10" ± 1" (H).
  7. Height of face opening above bib seam 4" ± ½" (I).


SIZE:

  • One size hood shall fit all.


LABELING AND USER INFORMATION:

  • Each hood is clearly labeled to identify material contents, Date of Manufacture, Warning Statement and Care Instructions.

If you would like to review this product, please log in.