Nomex is a meta-aramid fiber developed in 1961 by DuPont and first marketed in 1967. Known for its inherent flame resistance, Nomex has been the fabric of choice for protective apparel in firefighting, oil, gas, petrochemical, industrial, military, police/swat, U.S. Forest Service and auto racing industries for over forty years. Nomex has outstanding strength and abrasion resistance so hoods manufactured from the fiber have exceptional wear life making them cost effective in the long run. Other properties of Nomex include:

• Inherently flame resistant
• Exceptional wear life
• Superb flash fire protection
• Excellent chemical resistance
• Easy Care – can be laundered using normal home and commercial laundering and dry cleaning techniques
• Mid-weight (7oz. / sq. yd.)
• Natural off-white color
• Less comfort than other hood fibers or fiber blends due to low moisture absorbency of 4.5%
• Meets CAL-OSHA Requirements
  Passes Fed. Test 191, Method 5903.2: CAL OSHA Sections 3406(d)
• Complies with OSHA Rule 29 CFR Part 1910, 269

FABRIC:        

• Material composition of hood is 100% Nomex®/(Meta-Aramid)  - approx. 7 oz. sq. yd. and knit in a 1 x 1 rib construction for better stretch and comfort.

STITCH TYPES AND SEAMS:

• All stitching conforms to Federal Standard 751 Specifications (FED-STD-751).
• Major seams are flat seam assembled, stitch type 607.
• Elastic in face opening is serged in with stitch type 504 and reinforced with bottom cover-stitch, stitch type 406.
• Binding is applied with bottom cover-stitch, stitch type 406.

THREAD:

• All sewing is done with 100% Nomex thread size TEX 40.

CONSTRUCTION:

• The hood shall be composed of one layer of knit.
• Hood is assembled with flat seam cover stitch
• Face opening shall be an oval shape measuring 6" in width and 3¼" in height. Extra-Heavy ½" wide elastic is serged to the perimeter of the face opening. The face opening with elastic is then folded back ½" and cover stitched. The heavier elastic around the face opening stretches a full 17" for easy donning.  It also is guaranteed to fit snugly around all styles of SCBA masks and will retain its shape better after repeated use and laundering.
• The bottom edge of bib is completely bound with self-fabric bias cut binding (cut in five degree cut pattern).
   

FINISHED HOOD MEASUREMENTS:        

1. Length of hood top 14 ± ½" (1).
2. Width of hood top at top of face opening 8" ± 1" (2).
3. Width of hood top at center of face opening 6" ± ½" (3).
4. Width of hood top at bottom edge 9" ± 1" (4).

SIZE:

• One size hood shall fit all.

LABELING AND USER INFORMATION:

• Each hood is clearly labeled to identify material contents, Date of Manufacture, Warning Statement and Care Instructions.

• Not compliant with NFPA 1971 - Current Edition.