Cobra™ Classic™ hoods provide double layer coverage of neck, upper chest and top of the shoulder blades. The notched side helps bib lie flat for improved interface with bunker coat. Flat-stitched seams eliminate bunching and won’t dig into skin. A half inch wide elastic face opening stretches to full 17" to ensure a snug fit around most SCBA masks.
PGI's proprietary tri-blend of Lenzing FR®, high strength para-aramid and high tenacity nylon. This superb flame resistant fiber combination offers an outstanding TPP rating, arc flash protection and excellent moisture absorbency.
Thread
Cobra™ hoods are available sewn with either color-coordinated (matching) or color-contrasting 100% Nomex® thread.
Direct Embroidery
100% Nomex® thread embroidered on bib. Minimum order 25 each.
Ink Heat Transfers
High resolution multi-color transfers. Minimum order 100 each.
| Fabric Performance Values | PGI Test Results | |
| Thermal Protective Performance (TPP) | ||
|
32.7 | |
|
31.5 | |
| Hood Material Burst Strength | 476 N | |
| Flame Resistance Test | ||
After Flame (Wales x Courses) | ||
| 0.0 sec x 0.0 sec | |
| 0.0 sec x 0.0 sec | |
Char Length (Wales x Courses) | ||
| 42 mm x 44 mm | |
| 28 mm x 41 mm | |
| Cleaning Shrinkage Resistance Test | ||
Hood Measurement | ||
|
-0.7% to 0.0% | |
| Heat & Thermal Shrinkage Resistance Test | ||
Hood Measurement | ||
| -1.4% to 0.0% | |
| -0.4% to 0.9% | |
| Limited Oxygen Index (LOI) | 31 | |
| Seam Breaking Strength Test | 789 N | |
| Melt or Drip When Exposed to Flame | NONE | |
| Arc Thermal Performance Value (ATPV) | 33 cal/cm2 | |
| NFPA 70E Hazard Risk Category (HRC) | HRC 3 |
