Cobra™ Classic™ hoods provide double layer coverage of neck, upper chest and top of the shoulder blades. The notched side helps bib lie flat for improved interface with bunker coat. Flat-stitched seams eliminate bunching and won’t dig into skin. A half inch wide elastic face opening stretches to full 17" to ensure a snug fit around most SCBA masks.
Considered the ultimate high-tech fabric for thermal protection and comfort. The Carbon Shield™ fabric simply won’t burn in air. Additionally, this fabric has excellent moisture regain and wicks moisture away from the skin to the outer shell enabling it to evaporate at a rapid rate.
Thread
Cobra™ hoods are available sewn with either color-coordinated (matching) or color-contrasting 100% Nomex® thread.
Direct Embroidery
100% Nomex® thread embroidered on bib. Minimum order 25 each.
Ink Heat Transfers
High resolution multi-color transfers. Minimum order 100 each.
| Fabric Performance Values | PGI Test Results | |
| Thermal Protective Performance (TPP) | ||
|
31.2 | |
|
33.1 | |
| Hood Material Burst Strength | 411 N | |
| Flame Resistance Test | ||
After Flame (Wales x Courses) | ||
| 0.0 sec x 0.0 sec | |
| 0.0 sec x 0.0 sec | |
Char Length (Wales x Courses) | ||
| 0 mm x 0 mm | |
| 0 mm x 0 mm | |
| Cleaning Shrinkage Resistance Test | ||
Hood Measurement | ||
|
-1% to 0.3% | |
| Heat & Thermal Shrinkage Resistance Test | ||
Hood Measurement | ||
| -1.4% to 0.0% | |
| 0.0% | |
| Limited Oxygen Index (LOI) | 43 | |
| Seam Breaking Strength Test | 630 N | |
| Melt or Drip When Exposed to Flame | NONE | |
| Arc Thermal Performance Value (ATPV) | 32 cal/cm2 | |
| NFPA 70E Hazard Risk Category (HRC) | HRC 3 |
